Neptune system Conductivity, Temperature, I/O Expansion (PM2)
Neptune Systems Conductivity, Temperature, I/O Expansion (PM2)
REAL-TIME MONITORING OF SALINITY IN YOUR AQUARIUM
Maintaining consistent salinity in your aquarium is key to the well being of every organism inside it. And, as busy as we sometimes are, we don’t even realize our parameters are out of whack until it’s too late. With this module, your Apex will be constantly monitoring the Salinity in your tank and will let you know the minute it is trending outside of the safety zone.
And, there is an added bonus, you get an extra temperature port as well as six I/O switch inputs for use on ATO, feed buttons, or whatever else you may come up with.
Salinity varies with water temperature. This extra temperature port is extra important because, when used, it is coupled with the conductivity probe’s value to calculate the most accurate real-time salinity measurement possible.
EATURES OF THE SALINITY MODULE INCLUDE:
Monitor/Control Conductivity/Salinity and temperature
4 Measurement ranges (0-900 uS/cm, 0-9.0 mS/cm, 0-90.0 mS/cm, 0-50 ppt)
6 digital inputs for dry contact switches- float switches, push buttons, pressure sensors, etc.
Full datalogging support in Apex Base module
Up to 240 AquaBus modules can be added to the Apex system
Plug and Play. Automatically recognized when installed into the system
Two AquaBus connectors for flexible expansion via AquaBus
Comes with 3′ AquaBus cable
Galvanic Isolation for accurate and reliable probe readings
Led Status Indicator
Compatible with all Apex systems