There is nothing worse than coming down in the morning to finding your favourite fish lying crispy on the carpet.
Many fish, especially wrasse, have a tendency to jump from the tank when frightened or chased by another fish and so a solution to preventing the loss of such fish should be high on every fish keepers priority list.
The DIY Aquarium Covers are a very lightweight, sleek, low visual impact and easy to construct screen cover suitable for most aquarium types, specifically designed to prevent fish loss due to jumping whilst maintaining high light penetration.
Dimension of Product ; 75 cm x 75 cm
The new Jumpguard Pro now includes cutout and brace bar parts as standard and an aesthetic black mesh.
Available in the following versions and are designed to be cut to size:
TC7575PRO – 75cm x 75cm nominal size.
TC12075PRO – 120cm x 75cm nominal size.
TC18075PRO – 180cm x 90cm nominal size.
The maximum size frame that can be made from each kit will be 3.6cm longer than stated in each direction.
The tank should be measured from inside face of glass to inside face of glass.
For those concerned with loss of light penetration into your reef tanks, we tested light levels with a Apogee MQ-200 meter and got the following results:
PAR without cover around 390 – 400
PAR with cover around 380 – 390
Approximately a 2.5% reduction in light with no shadowing at all.
The DIY Aquarium cover is designed sit neatly inside the top lip of the aquarium glass.
Items are supplied oversized to allow you to cut to fit your own aquarium.
Additional components available (corners, mesh, aluminium frame etc).
What is Included in the kit
The Jumpguard Pro Aquarium Cover is a kit of parts which allows the aquarist to create a custom frame for their specific aquarium. The rigid corners and extruded aluminium section create a very solid frame which sits neatly inside glass of the aquarium glass, resting on the top lip.
4 x Aluminium frame sections
4 x Plastic corners
2 x Plastic handles
1 x Length of rubber spline
1 x Sheet of black mesh
1 x Spline roller tool
1 x Instruction manual
2 x Reverse corners to form flexi-cutout
1 x Brace bar (TC7575PRO), 2 x Brace bars (TC12075PRO), 3 x Brace bars (TC18090PRO) + clips and attachments
DD 120 cm Jump guard Pro DIY Aquarium cover There is nothing worse than coming down in the morning to finding your favourite fish lying crispy on the carpet. Many fish, especially wrasse, have a tendency to jump from the tank when frightened or chase…